概述
W5500S2E系列串口轉以太網模塊支持數據透傳以及AT命令兩種數據傳輸模式,同時支持TCP Server、TCP Client、UDP、Modbus等工作模式,串口波特率最高可達1.152Mbps,並提供配套的上位機配置軟件,也可通過網頁或AT命令等方式輕鬆配置。
W5500S2E系列串口轉以太網模塊採用了ARM Cortex-M3單片機+全硬件TCP/IP 協議棧以太網接口芯片W5500的架構,使得網絡通信更加快速、穩定、安全。用戶只需根據手冊中推薦的參考設計原理圖,即可快速完成硬件電路的設計,降低開發難度,節省開發時間。
W5500S2E系列串口轉以太網模塊分為以下型號:
- 尺寸:34.00×24.00×12.40 (mm)
- 網口類型:網絡變壓器
- 電源:DC 3.3V
- 工作溫度:-40°C ~ +85°C
- 尺寸:44.45×31.75×15.75 (mm)
- 網口類型:網絡變壓器
- 電源:DC 5.0V
- 工作溫度:-40°C ~ +85°C
- 尺寸:44.45×31.75×23.00 (mm)
- 網口類型:RJ-45
- 電源:DC 3.3V
- 工作溫度:-40°C ~ +85°C
特點
W5500S2E系列串口轉以太網模塊具有以下主要功能特點:
- 支持Modbus RTU/ASCII轉Modbus TCP/UDP以及Modbus over TCP/UDP
- 支持數據透傳以及AT命令兩種數據傳輸模式
- 串口支持485收發控制使能
- 波特率設置範圍為1.2Kbps~1.152Mbps之間常用的16組波特率值
- 支持TCP Server、TCP Client、UDP、Modbus等工作模式
- 高達2048字節的串口發送緩存以及2048字節的網口接收緩存
- 集成全硬件TCP/IP 協議棧以太網接口芯片,確保數據通信快速、安全、穩定
- 靈活的串口數據分包設置,滿足用戶多樣化的分包需求
- 支持Keep Alive功能,保證網絡鏈路實時暢通
- 支持DHCP自動獲取IP地址
- 支持DNS功能,滿足用戶通過域名實現模塊與服務器通訊的需求
- 支持NetBIOS功能,方便用戶通過模塊名稱輕鬆訪問模塊
- 支持連接密碼校驗功能,提高通信安全性
- 支持串口AT命令模式配置、Web網頁配置以及上位機工具配置
- 支持上位機本地固件升級以及Web網頁遠程升級
產品特性
- 32位的ARM Cortex-M3 MCU
- LAN
- 10/100Mbps自適應以太網
- 串口
- 3.3V TTL×1:TXD、RXD、CTS、RTS、GND
- 串口通信參數
- 波特率:1.2Kbps至1.152Mbps之間常用的16組波特率值
- 數據位:7,8
- 停止位:0.5,1,1.5,2
- 校驗:NONE、ODD 、EVEN
- 流控:NONE、CTS/RTS
- 電源
- W5500S2E-S1:DC 3.3V
- W5500S2E-Z1:DC 5.0V
- W5500S2E-R1:DC 3.3V
- 尺寸(長×寬×高)
- W5500S2E-S1:34.00×24.00×12.40 (mm)
- W5500S2E-Z1:44.45×31.75×15.75 (mm)
- W5500S2E-R1:44.45×31.75×23.00 (mm)
- 工作溫度
- W5500S2E-S1:-40 ~ +85℃
- W5500S2E-Z1:-40 ~ +85℃
- W5500S2E-R1:-40 ~ +85℃
- 保存環境
- W5500S2E-S1:-50 ~ +95℃、5 ~ 95% RH
- W5500S2E-Z1:-50 ~ +95℃、5 ~ 95% RH
- W5500S2E-R1:-50 ~ +95℃、5 ~ 95% RH
參數配置方式
W5500S2E系列串口轉以太網模塊提供了三種常用的參數配置方式供用戶選擇:
- 串口AT命令配置,用戶可將W5500S2E集成於自己嵌入式產品的主板上,主MCU通過發送串口AT命令進行參數配置,用戶也可直接通過上位機串口工具通過AT命令配置模塊;
- Web瀏覽器配置,用戶可在與模塊處於同一局域網內的計算機端通過Web瀏覽器進行配置;
- WIZS2E ConfigTool上位機軟件配置,用戶可在與模塊處於同一局域網內的計算機端使用WIZS2E ConfigTool上位機軟件進行配置
快速測評接線說明
軟件工具 |
---|
WIZVSP - Virtual Serial COM Port program Notes It can be used to change the device that is connected to the PC through the existing serial interface to control by the remote Ethernet network. If you agree with the End User License Agreement for WIZVSP, you will be able to download the program and get a registration key. When registering the product with license agreement, the MAC address of the product in use and the email address of the contact person are required. |
硬件參考設計 |
---|
固件列表 | 版本號 | 發布日期 |
---|---|---|
Release notes Release notes: 1. add command : at + ping = ip<,retries><,timeout> 2. add UDP multicast function, when destination ip as multicast ip, auto enable multicast function 3. modify the error message respond as following Error Info 0: Command Invalid 1: Connection Failed - this error message: in wrong operating mode, use at command for create tcp server/connect to server. ex) in tcp server mode, use at + connect 2: Wrong Password 3: Parameter Format Invalid 4: Parameter Number Invalid 5: Connection Timeout 6: Invalid IP Address Note: For older firmware or customized firmware, please contact us. | 2.4 | 2020-08-26 |
Release notes Release notes: 1. add command : at + ping = ip<,retries><,timeout> 2. add UDP multicast function, when destination ip as multicast ip, auto enable multicast function 3. modify the error message respond as following Error Info 0: Command Invalid 1: Connection Failed - this error message: in wrong operating mode, use at command for create tcp server/connect to server. ex) in tcp server mode, use at + connect 2: Wrong Password 3: Parameter Format Invalid 4: Parameter Number Invalid 5: Connection Timeout 6: Invalid IP Address Note: For older firmware or customized firmware, please contact us. | 2.4 | 2020-08-26 |
Release notes Release notes: 1. add command : at + ping = ip<,retries><,timeout> 2. add UDP multicast function, when destination ip as multicast ip, auto enable multicast function 3. modify the error message respond as following Error Info 0: Command Invalid 1: Connection Failed - this error message: in wrong operating mode, use at command for create tcp server/connect to server. ex) in tcp server mode, use at + connect 2: Wrong Password 3: Parameter Format Invalid 4: Parameter Number Invalid 5: Connection Timeout 6: Invalid IP Address Note: For older firmware or customized firmware, please contact us. | 2.4 | 2020-08-26 |